AT-4/868 UHF
FAAC S.p.A. Via Calari, 10 – 40069 – Zola Predosa (BO) - Italy
Page 8 of 25
3.2
CONNECTIONS
The cables inside the AT-4/868 UHF are connected by means of connectors with
spring terminals which make for an easy and intuitive use.
1.
Remove the sheath from the cable for approx. 9
mm (
0.35 inch
).
2.
Using a screwdriver push downward to free the
cable passage. Use a screwdriver with thin flat
bit.
3.
Fit the cable into the connector terminal.
4.
When the screwdriver is removed, the cable
remains blocked thanks to the spring connector.
5.
Check if the cable is correctly fixed by drawing it
gently.
Fig.7
Note 1: One cable only for each terminal.
Note 2: Usually there is no need to use pins. However, if this is necessary, you can use
them provided that they are correctly crimped.
See Appendix A for the recommended cable section.
