![background image](http://html1.mh-extra.com/html/faac/a140-air-series/a140-air-series_manual_3118617024.webp)
22
ENGLISH
• Take the automated system into closing position.
• Turn the two pairs of screws (Fig. 37 ref.
and
) of each carriage to obtain the
required adjustment.
• Tighten the screws (Fig. 37 ref.
and
) .
• Check if the closing contact point between the two leaves corresponds to
the support profile mid-point and if the leaves are able to open and close
completely.
Make sure that the belt is not too loose or too taut.
Belt tensioning procedure:
• Loosen the nut (Fig. 37b ref.
).
• Turn the screw and bolt (Fig. 37b ref.
) to tighten or loosen
the belt.
• After controlling tension, tighten the nut (Fig. 37b ref.
)
10-1A ADJUSTING BELT TENSION
fig. 37b
Содержание A140 AIR Series
