F5 i5000 Series, Настройка

Страница: 12 / 30

Hardware Quantity
Quick-install rails 2
#8-32 pan head screws, steel zinc 2
#8-32 thumb screws (from rail kit) 8
Rail lock brackets 2
M3 x 8mm flathead screws, black with patch (threadlock) (for rail lock brackets) 4
Install the rail lock brackets
Be sure that the rails are installed onto the chassis before you install the rail lock brackets.
The rail lock brackets secure the platform to the rack when you are using the quick-install rail kit.
1. Use a #1 Philips screwdriver to attach the rail lock brackets to each side of the unit using two of the
black M3 x 8mm flathead screws that are provided with the kit.
Use 5 inch-pounds (0.6 Newton-meters) of torque on these screws.
2. Slide the unit into the rack.
Warning: Due to the weight of the platform, at least two people are required to install this chassis into
a rack. Failing to use two people can result in severe personal injury or equipment damage.
3. Use a #2 Philips screwdriver to secure the rail lock brackets to the rack on each side of the unit using
one of the #8-32 pan head screws that are provided with the kit.
Use 14 to 16 inch-pounds (1.6 to 1.8 Newton-meters) of torque on these screws.
12
Platform Installation