F5 520, Руководство пользователя

Страница: 22 / 61

Chapter 1
1 - 12
Note
If the platform is inter-operating with an external switch, the media setting
should match that of the switch.
Setting the duplex mode
You can set duplex mode to full or half duplex. If the media type does not
allow duplex mode to be set, this is indicated by an onscreen message. If
media type is set to auto, or if setting duplex mode is not supported for the
interface, the duplex setting is not saved to bigip_base.conf.
Use the following syntax to set the duplex mode:
b interface <if_name> duplex full | half | auto
(Default mode is auto.)