F1 10787, Оригинальная инструкция по эксплуатации

Страница: 15 / 112

Impact Wrench IW350 15
EN
Ope r a t ion
Caution!
Unsuitable sockets can break during use and may
cause injury.
•
Use only the sockets supplied.
•
Do not hold the sockets when turning on the
impact wrench.
•
Always disconnect the device from the mains
socket before inserting or removing a socket.
Note:
•
Several attempts may be required to loosen
tight fittings. However, avoid continuously us-
ing the device for too long to prevent damage.
•
Do not overtighten small screws in particular.
Note the torque rating.
•
Rust or other debris on the threads or under
the screw heads may affect the strength of the
fitting.
•
Always let the impact wrench come to a
complete stop before changing the direction of
rotation.
•
Note the operating instructions of the respec-
tive items during use (vehicle, car jack).
U s e
Fastening and loo s ening fi tt ing s
1. Attach the appropriate socket on the socket
adapter until it clicks into place. Make sure
that the socket is firm and secure.
2. Plug the power plug into a 230 V mains socket.
3. Verify the direction of rotation is correct before
applying the impact wrench.
•Forward (fasten)
•Reverse (loosen)
4. Press the on/off switch to switch on the
impact wrench.
Caution!
The impact wrench will continue running for a
few more turns after it has been switched off.
5. Release the on/off switch to stop the impact
wrench.
6. After you have finished using the impact
wrench, unplug the power plug from the 230 V
mains socket.
7. Remove the socket from the socket adapter
and store the device safely.
8. Use a torque wrench to verify the fitting has
the required torque.
Notice for wheel fitting:
After driving about 50 km, retighten the wheel
nuts /screws and verify they are tight.
Te c hnic al
da t a
Model IW350
Item number 10787
max. torque Anti-clockwise rotation
(unscrew) 350 Nm
Clockwise rotation (screw in)
150 Nm
Idle speed n
0
2300 min
-1
Rated voltage 230-240 V AC, 50 Hz
Rated input power: 900 W
Socket adapter size
(square)
12.7 mm
Socket size (spanner
size)
17 mm, 19 mm, 21 mm, 22
mm
Sound pressure level
L
PA
/ K
PA
96,0 dB (A) / 3,0 dB (A)
Sound power level
L
WA
/ K
WA
107,0 dB (A) / 3,0 dB (A)
Hand-arm vibration
a
h
/ K
17,7 m/s² / 1,5 m/s²
Weight 3,0 kg
Ambient tempera-
ture
-20 to +40 ºC
Protection class Class II
IP protection IPX0
Note:
The sound and vibration values were measured in
accordance with EN 62841-2-2.