F-SECURE CLIENT SECURITY 7.00, Руководство администратора

Страница: 279 / 315

APPENDIX A 279
A.1 Overview
Prodsett.ini informs the Setup program which modules to install and
where to install them (the target directory) on workstations. This Appendix
contains a list of the settings that can be edited in
prodsett.ini .
A.2 Configurable Prodsett.ini Settings
You can edit edit the following settings in the prodsett.ini file.
WARNING: Do not edit any prodsett.ini settings in that are not
included in this Apppendix.
Dependency between RequestInstallMode and InstallMode
settings:
The RequestInstallMode setting can override the selection for
components, which have InstallMode=0.
[F-Secure common] Common settings
CD-Key=XXXX-XXXX-XXXX-XXXX-XXXX Enter the CD Key of the installation package here.
SetupLanguage=ENG Enforced Installation language.
If the setting is empty or defined as "AUTO", the
installation language is automatically chosen at
the host based on the default system locale. The
chioce is limited by the set of supported
languages (see SupportedLanguages).
SetupMode=1 1 = Network client (default). If SetupMode=1, the
correcponding centralized management settings
should be defined in [PMSUINST.DLL] section.
2 = Stand-alone setup mode.