F-SECURE ANTI-VIRUS FOR MICROSOFT EXCHANGE 8.00 -, Руководство администратора

Страница: 133 / 349

CHAPTER 5 133
Centrally Managed Administration
5.4.1 Interface
Specify how the server will interact with clients.
IP Address Specifies the service listen address in case of
multiple network interface cards or multiple IP
addresses. If you do not assign an IP address
(0.0.0.0), the server responds to all IP
addresses assigned to the host.
TCP Port Specifies the TCP port that the server listens for
incoming requests. The default port number is
18971. If you change this port number, you must
modify the connection settings of the client
accordingly, so that the client sends requests to
the same port.
Accept Connections Specifies a comma-separated list of IP
addresses the server accepts incoming requests
from. If the list is empty, the server accepts
connections from any host.
Max Connections Specifies the maximum number of simultaneous
connections the server can accept. Value zero
(0) means no limit.
Max Connections Per
Host Specifies the maximum number of simultaneous
connections the server can accept from a
particular host. Value zero (0) means no limit.
Send Content
Timeout Specifies how long the server should wait before
it timeouts on sending data to the client.
Receive Content
Timeout Specifies how long the server should wait before
it timeouts when receiving data from the client.
Keep Alive Timeout Specifies the length of time before the server
closes an inactive/idle connection. This ensures
that all connections are closed if the protocol
fails to close a connection.