F.F. Group SPP 1200X, Оригинальное руководство пользователя

Страница: 4 / 28

| English 4 SPP 800X - SPP 1200X - SPP 800
SAFETY MEASURES
Read carefully the operating instructions
before assembling and starting. The appli-
ance must not be used by operators who
are not thoroughly acquainted with the
instructions handbook (operating instruc-
tions). Moreover, the appliance must not be
used by persons under the age of 16.
f
The user is liable towards third parties in the area
where the appliance is in operation.
f
Before starting it is necessary to check that the nec -
essary electrical protection measures are met, by
means of a test carried out by a specialist.
While the pump is operating, no person
should be in the liquid. The pump may be
connected only by means of a safety switch
for fault currents, with an opening rated
current up to 30 mA and a socket with an
earth contact in compliance with the reg-
ulations.
Protection: at least 10 Amps.
Operation in swimming pools and garden
ponds is not recommended.
CAUTION: Before checking, unplug the
pump from the mains!
Replacing the power supply cable requires using
special tools and therefore you must address to
the authorized after-sales service.
The pump may only operate with an extension ob -
tained through cable mod. H07 RNF and a thread
section of no less than 1 mm in compliance with
the DIN 57282 or DIN 57245 standard.
f
The noise (continuous equivalent in dbA) of the mo -
tor-driven pumps is less or equal (≤) to 85 dbA.
f
The voltage (230 Volts alternating current) indicated
on the pump rating plate must correspond to the
available mains voltage.
f
The temperature of the liquid conveyed must not
exceed 35
ο
C.
f
Never attempt to lift or move the pump by stretch -
ing the power-supply cable whilst it is plugged into
the mains.
f
Make sure that the plugged electrical connections
are in an area safe from flooding and are protected
from humidity.
f
Before use it is necessary to check that the plug and
the mains connection line are not damaged.
f
Unplug from the mains before performing any work
on the pump.
f
Avoid directly exposing the pump to the jet of water.
f
The user is responsible for complying with the local
regulations concerning assembly and safety.
f
The user by taking appropriate measures (e.g. install -
ing an alarm, reserve pump and the like) will have to
exclude the possibility of indirect damage caused by
flooding premises due to failure of the pump.
ENGLISH
f
In the event of the pump failing, repair work may
only be carried out by the repair workshops of the
authorized service. Only genuine spare parts must
be used.
f
It is notified that in conformity with the law on prod -
uct liability we cannot be held responsible for the
damage caused by our appliance:
1. Because of improper repairs not carried out by
the personnel of the assistance points autho -
rized by us; or
2. If GENUINE SPARE PARTS are not used to re -
place parts; or
3. If the indications and provisions given in the
instructions handbook are not complied with.
The same provisions hold for the accessories.
RESISTANCE
This pump should not be used to convey inflam -
mable, combustible or explosive liquids.
TECHNICAL DATA
Article Number 43 483 43 484 43 485
Model
SPP
800X
SPP
1200X
SPP
800
Voltage /
Frequence
V 230 230 230
Hz 50 50 50
Rated Power W 800 1200 800
Max. height m 38 46 38
Max.
flow rate
L/h 3200 3700 3500
Max.suction
height
m 8 8 8
Max. Grain
Size
mm 1 1 1
Diameter of
Connecting
Pipe
1” 1” 1”
Max.
Pressure
bar 3,8 4,6 3,8
Max. Noise dB 85 85 85
Max.media
temperature
o
C 35 35 35
Cable Lenght m 1 1 1
Weight kg 6,4 7,7 6,4
Protection IPX4 IPX4 IPX4
Insulation
Class
B B B