![background image](http://html2.mh-extra.com/html/f-f-group/os-150-easy/os-150-easy_original-instructions-manual_3084551007.webp)
English | 7
www.ffgroup-tools.com
OS 150 EASY
You can also connect your tool to a suitable dust ex-
traction system through the extraction port. Hose
adaptors (not included) may be needed depending
on the side of your dust hose.
SELECTING THE SANDING SHEET
Depending on the material to be worked and the
required rate of material removal, different sanding
sheets are available:
For the working of all wooden materials
For coarse - sanding,
e. g. of rough, unplaned
beams and boards
coarse
40, 60
For face sanding and
planing small irregu-
larities
medium
80, 100, 120
For finish and fine sand
-
ing of hard woods
fine
180, 240
For the working of paint/enamel coats or prim-
ers and fillers
For sanding off paint
coarse
40, 60
For sanding primer
medium
80, 100, 120
For final sanding of
primers before coating
fine
180, 240
MAINTENANCE
Regular inspection and cleaning reduces the neces-
sity for maintenance operations and will keep your
tool in good working condition. The motor must be
correctly ventilated during tool operation. For this
reason avoid blocking the air inlets.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing
as waste. Machine, accessories and pack-
aging should be sorted for environment -
friendly recycling. The plastic components
are labeled for categorized recycling.
EXPLANATION OF SYMBOLS
Double insulation
For indoor use only. Do not expose to
rain.
Wear eye protection.
Damage to lungs if an effective dust mask
is not worn.
Wear protective gloves
Damage to hearing if effective hearing
protection is not worn.
To reduce the risk of injury, the user must
read and understand this manual before
using this product.
Important!
Conforms to relevant safety standards
GUARANTEE
This product is warranted in accordance with the le-
gal/country specific regulations, effective from the
date of purchase by the first user. Damage attribut
-
able to normal wear and tear, overload or improper
handling will be excluded from the guarantee. In
case of a claim, please send the machine, complete-
ly assembled, to your dealer or the service Centre
for electric power tools.
DECLARATION OF CONFORMITY
We declare under our sole responsibility that this
product is in conformity with the following stan-
dards or standardized documents: EN 60745-1, EN
60745-2-4, EN 55014-1, EN 55014-2, EN 61000-3-2,
EN 61000-3-3 in accordance with the provisions of
the directives 2006/42/EC, 2014/30/EU.
Technical File at:
FF GROUP TOOL INDUSTRIES S.A.,
19300, Aspropyrgos - Greece
Loudovikos Tsirigiotis
Operations & Engineering
FF GROUP TOOL INDUSTRIES S.A., 19300
Aspropyrgos - Greece. 19/01/2018
Содержание OS 150 EASY
Страница 3: ...www ffgroup tools com 3 OS 150 EASY 2 1 3 6 5 4...
Страница 18: ...18 OS 150 EASY FI RCD f f f f f f f f f f f f f f f f f f f f f f f f f f f f SERVICE 1 2 3 4 5...
Страница 19: ...19 www ffgroup tools com OS 150 EASY 6 7 f f f f f f Raynaud II f f f f f f f f OFF...
Страница 32: ...32 OS 150 EASY f f f f f f f f 1 2 3 4 5 6 7 f f f f f f...