F.F. Group HPW 150i PLUS, Оригинальное руководство пользователя

Страница: 14 / 68

| English 14 HPW 150i PLUS | HPW 160i PLUS
SAFETY NOTES FOR PRESSURE WASHER
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire and/
or serious injury.
The warnings and instructions may result
in electric shock, fire and/or serious injury.
The warning and information signs attached
to the unit provide important information for safe
operation. Part from the information in the oper-
ating instructions comply with the general safety
regulations and regulations for the prevention of
accidents. .
CONNECTING TO THE MAINS
f
The voltage indicated on the rating plate must corre-
spond to the voltage of the power source.
f
We recommend that this equipment is only connect-
ed into a socket which is protected by a circuit-breaker
that would be actuated by a 30 mA residual current.
f
Remove the plug from socket whenever the machine
is left unattended for any period.
f
The electric supply installation should comply with
IEC 60364-1.
f
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly quali-
fied persons in order to avoid a hazard.
f
Never touch the mains plug with wet hands.
f
Do not pull plug while operating the device.
f
Do not run over, crush or pull the power supply cord
or extension cord, otherwise it may be damaged. Pro-
tect the cable from heat, oil and sharp edges.
f
Do not use the unit, if the power supply cord or im-
portant parts, e. g. high-pressure hose, power gun or
safety devices are damaged.
f
Warning: Inadequate extension cords can be danger-
ous.
f
If an extension cord is used, the plug and socket
must be of watertight construction. The extension
cord must have a cross section in accordance with
the operating instructions and be protected against
splashed water. The connection must not be in water.
f
When replacing plugs on the power supply cable or
extension lead the spray water guard and mechanical
stability must remain intact.
WATER CONNECTION
f
Comply with the regulations of your water supply
company.
f
All connecting hoses must have properly sealed joints.
f
Make sure that the supply hose is at least 12.7 mm
(1/2") in diameter and is reinforced.
f
The appliance should never be used on the drinking wa-
ter supply without a back flow valve. Water which has
passed the back flow valve is regarded as undrinkable.
f
The high-pressure hose must not be damaged (danger
of bursting). A damaged high-pressure hose must be
replaced immediately. Only use hoses and connections
recommended by the manufacturer.
f
High-pressure hoses, fittings and couplings are import -
ant for the safety of the appliance. Use only hoses, fit -
tings and couplings recommended by the manufacturer.
f
Only clean or filtered water should be used for intake.
APPLICATION
f
Before use, check that the unit and operating equip-
ment are in perfect condition and are safe to operate.
Do not use the unit if it is not in perfect condition.
f
Do not direct the jet against yourself or others in or-
der to clean clothes or footwear.
f
Do not use solvent-containing liquids, undiluted acids,
acetone or solvents! This includes petrol, paint thin-
ners, heating oil. The sprayed vapour is highly flamma -
ble, explosive and toxic.
f
The appropriate safety regulations must be observed
when using the unit in dangerous areas (e. g. petrol
stations). It is forbidden to operate the unit in poten -
tially explosive locations.
f
The unit must be placed on a solid base.
f
Take care if using the machine in a confined space
ensuring that there is adequate ventilation. Ensure
that all vehicles are switched off at all times whilst
cleaning.
f
Operation of this machine requires both hands to be
used at all times. Do not operate from a ladder. Take
care when using the machine on balconies or other
raised areas ensuring that you can see any edges at
all times.
f
Only use detergents recommended by the manufac-
turer. Comply with the application, disposal and warn-
ing instructions of the detergent manufacturers.
f
All current-conducting components in the working
area must be protected against splashed water.
f
The gun trigger must not be jammed in position “ON”
during operation.
f
Wear suitable protective clothing to protect against
splash water. Do not use the machine in reach of per-
sons, unless these are also wearing protective cloth-
ing.
f
If necessary wear personal protective equipment
(PPE) e. g. safety goggles, breathing protection etc
to protect against water, particles and/or aerosols
sprayed back from parts.
f
During use of high pressure cleaners, aerosols
may be formed. Inhalation of aerosols can be hazard-
ous to health.
f
High pressure may cause objects to rebound. If nec-
essary wear suitable personnel protective equipment
such as safety goggles.
f
Vehicle tyres/tyre valves may only be cleaned from a
minimum distance of 30 cm in order to avoid damages
by the high-pressure jet. The first indication of dam -
age is the discolouration of the tyre. Damaged vehicle
tyres/tyre valves are dangerous to life.
f
Materials containing asbestos and other materials
which contain sub stances which are hazardous to
your health must not be sprayed.
f
Never use the power washer without water filter,
or with a contaminated or damaged water filter.
Using the power washer without water filter or with
a contaminated or damaged water filter shall void the
warranty.
f
Metal parts may become hot after prolonged usage, if
necessary wear protective gloves.
f
Avoid high pressure washing in bad weather condi-
tions especially when there is a risk of lightning.
OPERATION
f
The operator must use the unit in accordance with
the regulations. He/she must take local conditions
ENGLISH