F.F. Group CMG 12V EASY, Оригинальное руководство пользователя

Страница: 8 / 104

| English 8
BATTERY TOOL USE AND CARE
f
Recharge only with the charger specified by the manufacturer. A charger
that is suitable for one type of battery pack may create a risk of fire when
used with another battery pack.
f
Use power tools only with specifically designated battery packs. Use of any
other battery packs may create a risk of injury and fire.
f
When battery pack is not in use, keep it away from other metal objects, like
paper clips, coins, keys, nails, screws or other small metal objects, that can
make a connection from one terminal to another. Shorting the battery ter-
minals together may cause burns or a fire.
f
Under abusive conditions, liquid may be ejected from the battery; avoid con -
tact. If contact accidentally occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the battery may cause
irritation or burns.
SERVICE
Have your power tool serviced by a qualified repair person using only iden -
tical replacement parts. This will ensure that the safety of the power tool is
maintained.
SAFETY INSTRUCTIONS FOR ALL APPLICATIONS
f
General safety instructions for grinding, sandpaper sanding, working with
wire brushes, polishing, milling and abrasive cutting:
a. This power tool is intended for use as a grinder, sandpaper sander, wire
brush, polisher, milling machine and abrasive cutting appliance. Please
follow all safety instructions, diagrams and data that you receive with
the appliance. If you do not observe the following instructions, this can
lead to electrical shock, fire and/or serious injuries.
b. Do not use any accessories that have not been provided or recommend-
ed by the manufacturer for this power tool. Just because you can at-
tach the accessories to your power tool, does not ensure they are safe
to use.
c. The permissible speed of the accessory tool used must be at least as
high as the maximum speed specified for the power tool. Accessories
that rotate faster than the permissible rate can break and throw pieces
into the air.
d. The external diameter and thickness of the accessory tool used must
comply with the dimensions of the power tool. Incorrectly dimensioned
accessory tools cannot be sufficiently shielded or controlled.
e. Grinding discs, sanding drums or other accessories must match the
grinding spindle or collet chuck of your power tool exactly. Accessory
tools which do not fit precisely into the take-up of the power tool will
rotate unevenly, vibrate severely and can lead to a loss of control.