F.F. Group CBBG 400 PLUS, Оригинальное руководство пользователя

Страница: 10 / 56

clockwise.
f
Remove the outer wheel flange and paper disc. Pull
the wheel free from the arbor. There will also be a
paper disc and a wheel flange on the back side of
the wheel which should also be removed.
f
Mount the new wheel in the reverse order. Al -
ways make certain there is are paper or fiber discs
between the wheel flanges and the wheel itself.
Tighten the nut snugly but DO NOT over-tighten.
Over-tightening can crack the wheel.
f
Re-install the guards and shields.
f
Run a new wheel for at least one minute while
standing clear of the line of rotation. If a wheel does
have defects it will generally fail as soon as it gets
up to full speed.
REPLACING SANDING BELT
To remove/replace a sanding belt:
1. Disconnect the machine from the power supply.
2. Remove the star knob from the righthand sand -
ing belt cover as shown (in Fig 7) and remove the
cover.
figure 7
3. Loosen the sanding belt tension knob, as shown
(in Fig 8).
figure 8
4. Pull the sanding belt tension knob down with
one hand and work the sanding belt off the roll -
ers with the other hand.
5. Install the new sanding belt in the reverse order
of removal and replace the belt cover.
6. Track the new sanding belt before turning the
machine on (see Belt Tracking).
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing as
waste. Machine, accessories and packaging
should be sorted for environment - friendly
recycling. The plastic components are labeled
for categorized recycling.
WARRANTY
This product is warranted in accordance with the
legal/country specific regulations, effective from
the date of purchase by the first user. Damage
attributable to normal wear and tear, overload or
improper handling will be excluded from the guar-
antee. In case of a claim, please send the machine,
completely assembled, to your dealer or the ser-
vice center for electric power tools.
| English 10 CBBG 400 PLUS