10
Turn all Input Text’s OFF
With alerts turned off the device will NOT text every time any Input changes but the Inputs are
still active so you can send a “Input status” query at any time. Linked outputs will not work.
Command:
Alerts off
The system responds with:
Alerts have been disabled
(this is saved to memory and will still
be disabled even after the unit is reset or rebooted)
OR
Command:
Alerts off exc links
(
note
only available in ver 1.2 or higher)
The system responds with:
Alerts have been disabled but linked outputs will still work
If an input is triggered no alert text will be sent but if the input has a link to an output that
output will activate.
Turn all Input Text’s ON
Command:
Alerts on
The system responds with:
Alerts have been enabled
Testing
Command:
test (only run this if you are present and can trigger the inputs)
The system responds with: Battery is currently ??.? volts, signal strength is ?? % , run test
now. The unit will now test the inputs and outputs and waits for the inputs to be triggered.
When input1 is turned on output1 will turn on, when input1 is turned off output1 will turn off
When input2 is turned on output2 will turn on, when input2 is turned off output2 will turn off
Test finished
If the input or inputs are not triggered this command will time out after 1 minute.
Get a list of the Inputs
Command:
Input status
Currently,
INPUT NAME
is ??,
INPUT NAME
is ??
Where ?? is either On or Off
If an Input is a latching input and on:
Currently the latching Input
INPUT NAME
is on and latched
If an Input is a latching input and off:
Currently the latching Input
INPUT NAME
is of
Get a list of the Outputs
Command:
Output status
The system responds with:
Currently,
Output Name
is ??,
Output Name
is ??
Where ?? is either On of Off
Ezy Switch SMS-2 Installation & Operation Manual
