Ezy-Lift 2000 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 21

Ezy-Lift 2000 Скачать руководство пользователя страница 7

7

7

Attach hydraulic hoses

Bring the hydraulic hose ends up through the hole in the Pump
Housing to be connected.  Remove one of the fitting-plug from
one of the hoses, affix the end to the valve fitting and tighten.
Repeat with the other hose end.  The larger (#6) fitting requires
an 11/16” wrench and the smaller (#4) requires a 9/16”
wrench.

Once the hose ends are connected to the pump pull the excess hose lengths out of the Pump Housing and bring
the slack back to the space in the Unit Frame on the passenger side. Use the tie wraps and secure the hoses to the
chassis under the truck, coil the remaining length in the passenger side space and use the tie wraps to hold the
coil together.

Connecting the Electrical Cords

Open the red Power Cord package.  Locate the long red Power Cord and lay it out the length of the truck cab
along side the driver’s side.  Find the Fuse Box and Fuse and the short Power Cord.  Position the short cord from
the battery to a clear area of the

«
...
5
6
7
8
9
...
»

Содержание 2000






















Отзывы:

Нет отзывов