BEFORE BEGINNING,SEE THE ASSEMBLY INSTRUCTION VIDEO ON
EZTRUNK.NET
PHANTOM JK-JKU Aluminum Tube Doors _Ver. A
07/05/22
CUSTOMER SERVICE: [email protected]
Text & Call : 203-901-0055 / Call 203-591-9060
Page
3
Attach the 2 door hinges to the new door using the 4 supplied M8x20 bolts and
hardware. Leave the bolts snug only at this time
,
IMPORTANT INSTALL
the
longer pin hinge on upper position of door and shorter pin hinge on lower position.
The upper hinge with longer pin ,which can be use to assist in guiding the door into
place.
1
2
CAUTION !
To avoid risk of injury latch mechanism must be properly adjusted
before use. Inspect and adjust as necessary should wear alter alignment of latch
and striker. Do not use door/latch if damaged.
3
With the door closed, loosen the four screws from the hinges (using a #5 allen
wrench and #13 open wrench), adjust door 2 directions position as needed and
proceed to tightened the screws.
4
Adjust the rubber stop so the doors do not move when driving. Turn the rubber to
adjust. Adjust the 2 screws if needed.
5
WE CAN HELP YOU!
Customer Service
Any question? WE ARE HERE TO HELP!
EMAIL US: [email protected]
Text or Call
203-901-0055 / Call 203-591-9060
7 days a week 8:30 am EST
Leave a little space between the Jeep and the lock
IMPORTANT
Keep hinge angle side faceing outside
LONG PIN UPPER HINGE
