Assembly Method
Please Note: Always remove the plug from the power socket before fitting or removing accessories.Ensure all
Filters are fitted, and fitted correctly before using.
01. lnsert the main air intake tube clamp with EVA hase into the suction socket, and hear the «click» Iock sound,
indicating that the Iock is secure. When disassembling, press and hold the buttons on bath sides of the main
air intake tube of the hase and gently pull it out.
02. Connect one end of the tube with the handle to the metal telescopic pipe. After inserting the telescopic
pipe, turn it to the left and right to confirm that the connection is firm. Pull out directly when disassembling.
03. The other end of the telescopic pipe is connected to the floor brush (or other brush). After inserting the floor
brush, rotate it to the left and right to confirm that the connection is firm. Pull out directly when disassembling.
04. Remove and install the dust cup Press the dust cup release button, the upper air duct bounces, then pick
up the dust cup handle and lift the dust cup up.
05. Before installing the dust cup, make sure that the filter device is installed in place. After the dust cup is
hung, press down on the air duct. After the «click» sound is locked, the dust cup is installed in place.
01
04
05
02
03
EN
