Cleaning & maintenance
1. Cleaning and maintenance of your microfiber pads
2EADTHEMAINTENANCEINSTRUCTIONSFORTHEMICROkBERPADS
7ASHBELOW#&
$ONOTBLEACH
$ONOTUSEFABRICSOFTENER
$ONOTTUMBLEDRY
$ONOTIRON
$ONOTDRYCLEAN
#LEANAFTEREACHMAINTENANCEOFYOURWINDOWS
0LEASECONTACTARESELLERORTHEBRANDTOPURCHASEOTHERMICROkBERPADS
&OROPTIMALCLEANINGITISRECOMMENDEDTOCHANGEYOURCONSUMABLESEVERYMONTHS
2. Replace the tank.
5SEA0HILLIPSSCREWDRIVERTOUNSCREW
4HERESERVOIR
- Disconnect the cable from the old tank,
THENDRAGITTOEXTRACTIT
- Connect the new tank to the robot,
SLIDEITBACKTHENTIGHTENTHESCREW
Maintenance frequency:
when the ultrasonic
NOZZLEISBLOCKEDANDCANNOTSPRAYWATER
0LEASE CONTACT A LOCAL DEALER OR LOCAL
authorized dealer for other consumable
SPAREPARTS
3. Replace the ultrasonic spray nozzle :
- Follow the instructions above to detach
4HERESERVOIR
3LIGHTLYLIFTTHESILICONERINGANDREMOVEITFROMTHETANK
Do not press on the welding spot and / or the ultrasonic
NOZZLE
0LACE THE NEW ULTRASONIC SPRAY NOZZLE ON THE TANK
make sure the connection cable is aligned near the side
of the tank, then install the bottom of the silicone ring
ONTHETANK
0RESSTHESILICONERINGTOkXITTHENUSEANOTHERkNGER
TOPRESSTHETOPOFTHESILICONERINGLIGHTLYINTOTHETANK
- Check that the new ultrasonic spray nozzle is properly
kTTEDTOTHETANK
- Connect the new tank to the robot, slide it back, then
TIGHTENTHESCREW
Maintenance frequency:
when the ultrasonic nozzle is
BLOCKEDANDCANNOTSPRAYWATER
#ONTACTALOCALDEALERORTHEBRANDFOROTHERSPAREPARTS
%.
---HOBOT---
