EZE GO EZE FOLD Скачать руководство пользователя страница 56

Страница: 56 / 64

The power button, for switching the

module and electric system on and

off (except the battery, that battery

has its own switch).
“+” button, which is used to shift up

the power assist level. This button will

also engage the 6km/h walk assist

mode when depressed.
“-“ button, which is used to shift down

the power assist level.

4.12. DISPLAY

All EZEGO models are equipped with an LED handlebar display module. This is how the rider controls

the electric system while riding their e-bike. The module is connected to the electric system via quick

connect cable with a male / female adaptor, for easy maintenance. Always make sure this connection is

secure before switching the system on.

On the module you will see 5 power bars. These power bars tell you exactly how much power your

battery has, in increments of 20%. Power levels go from left to right, as you can see the left side of these

power bars is marked “low”.

There are also 5 LED lights marked 1,2,3,4,5 from left to right. This tells the rider what level of power assist

they are in, 1 being low power assist, and 5 being high power assist. High power assist will supply the

most power while you pedal.

The last 3 buttons located on the module are:

For all the other electrical components, they should be left to a qualified electric bicycle mechanic

should you encounter any issues.

ON/OFF

ASSISTANCE UP

ASSISTANCE LEVEL

INDICATOR

BATTERY LEVEL

INDICATOR

ASSISTANCE DOWN /

WALK ASSIST

Содержание EZE FOLD

































































Результаты поиска

Содержание EZE FOLD

Отзывы:

EZE GO EZE FOLD, Руководство пользователя, Страница: 56 / 64

Результаты поиска

Содержание EZE FOLD

Отзывы: