EZE GO EZE FOLD Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 64

EZE GO EZE FOLD Скачать руководство пользователя страница 46

46

When clamping the quick release mechanism shut, make sure it is as tight as

possible. Clasp your hand around the frame to get extra leverage, once the lever

is locked in place it should have left a small indentation in the palm of your hand

to make sure it is tight enough.

It is very important that you do not exceed the “minimum

insertion” mark on your seat post. When the seat post is

inserted into the seat tube part of the frame, this “minimum

insertion” mark must not be visible. Failure to follow this

warning can result in component failure, and/or loss of control

resulting in injury.

It is very important that you do not exceed the “minimum

insertion” mark on your seat post. When the seat post is

inserted into the seat tube part of the frame, this “minimum

insertion” mark must not be visible. Failure to follow this

warning can result in component failure, and/or loss of control

resulting in injury.

Seat post installation (EZE Commute EX and EZE Step models)

Your e-bike is equipped with a hex (allen) key seat clamp. To tighten the clamp, or loosen it off requires

a 5mm hex (allen) key. When in a loose position, the seat post is ready to be inserted or removed as

required. Set your saddle at the correct height for you before you start clamping it into position.

Before finally clamping the seat post in place, make sure that the saddle is sat in line of the top tube,

pointing directly at the stem.

Always make sure that the seat post is clamped as tight as possible to

avoid accident or serious injury.

«
...
44
45
46
47
48
...
»

Содержание EZE FOLD

































































Отзывы:

Нет отзывов