6
6) Have the patient lower themselves down onto
the seat while keeping their knees/shins in the
knee/shin pads and while still holding the cross
bar with both hands as shown below. Make sure
both seat locks are locked in place.
7) Unlock the casters and place both hands on the
cross bar furthest from the patient and move the
EZ Way Stand Aid to the new surface. Make sure
the patient is secure and in proper position as
described in Step 6 above prior and during
transfer as shown below.
Once the EZ Way Stand Aid has been positioned
against the new surface, the following steps are
required
1) Position the EZ Way Stand Aid against the new
surface ensuring the patient will be in a position
to sit down firmly and safely on the new surface.
2) Lock the casters.
3) Have the patient pull themselves back up to a full
standing position.
4) Unlock and raise the two split seat units up to
a parallel position to allow the patient to lower
themselves.
5) Stand beside the patient as they lower themselves
down onto the new surface.
6) Make sure the patient is safely positioned then
unlock the casters and move the EZ Way Stand
Aid to storage.
