Page 11
www
.ezflo.com.a
u
TM
© 2020, EZ-FLO Fertilizing Systems
Frequently Asked Questions
All EZ-FLO systems have been specifically designed and engineered to be installed by a professional
irrigation or landscape contractor but may be installed by the end user without voiding the warranty.
Improper installation or use could cause risk of water contamination due to back flow or tank rupture.
Failure to follow all safety instructions and warnings could result in serious bodily injury.
Improper installation or use of the system voids all warranties.
Will I over fertilise?
No. When the unit is set on the maintenance (slow) setting it feeds in small amounts. It applies less
fertiliser over the same period of time than applying in large amounts once every 6 weeks.
If product is mixed with water, will it dilute?
This depends on the product but the patented flow process prevents dilution. EZ-FLO dispenses
products slowly over a long period of time so if dilution occurs, it will not effect the products performance.
The system did not inject any fertiliser
Refer to the “connector calibration“ and set the CBV to a further closed position.
Will the system clog drip irrigation?
No. The EZ-FLO can help clean drip systems and make them work effectively.
How do I winterize the system?
Simply close the shut off valves, disconnect it from the irrigation system and drain the tank.
Will the fertiliser stain?
Most fertilisers will not stain when dispensed through the EZ-FLO system. Check with manufacturers
of other products to confirm they will not stain prior to use.
The system is emptying too fast
Confirm you used the correct cap setting and check the “connector calibration” page and adjust
the CBV to a more open position.
My system is always full of water, is it working?
Yes! This is part of our patent and you can review the videos on our website to see how it works.
