2
Before Use
1. Please read this manual carefully before operation to avoid any misconduct.
2. Make sure that the storage device you want to use is of good quality and can be used
normally.
3. The capacity of target storage device must be greater than or equal to the capacity of
source storage device to avoid incomplete data backup.
4. It is recommended to use the Copy + Compare function when backing up, to ensure that
the backup data is 100% the same as the source data, because the target storage
device may have write errors or damaged sectors.
5. When updating the firmware, please do not turn off the power. If the power is interrupted
accidentally, the machine cannot be turned on, and it must be returned to the factory for
processing.
6. Keep the duplicator used in a dry environment. Rain, moisture, liquid, etc. may corrode
the circuit board and cause the machine to malfunction.
7. Avoid using the duplicator in dusty or dusty environments. Dust may cause bad contact
with the port.
8. This product warranty does not apply to accident, man-made destruction, abuse, or
improper use (such as using not in accordance with the product description, or intended
to exceed the scope of use for which this product was designed, or improper use of
fixtures, etc.)
9. If the duplicator performs normally, it is strongly recommended not to update the
firmware, unless there is a problem in use or a new function is required.
10. For convenience, the source storage device will be referred to as the source device, and
the target storage device will be referred to as the target device in this manual. The
storage device used can be USB flash drive, SD or CF memory card based on the model
of duplicator.
