15
Restored disks, the targets disks you want to restore to, have to be connected to
target
ports
, 1, 2, 3 disks are supported.
1.2 Compare
This function allows to compare the copied target disks against the source for accuracy.
If a bad sector is determined on the source disk, the process of compare will be stop and
show compare error. All connection and operation procedure diagrams are the same as
1. Copy
. Please refers to the above description.
1.3 Copy + Compare
This function allows duplicator to start Copy process first, then follow with Compare
process immediately. All connection and operation procedure diagrams are the same as
1. Copy.
Please refers to the above description.
2. Data Erase
There are 8 erase methods to be selected by users according to their demands. When a bad
sector was met during the erase process, the system will skip the bad sector and then keep
erasing the following sectors. At the same time, the
RED LED
flashes. After the erase task is
finished, the RED & GREEN LED keep light on.
2.1 Quick Erase
[Duplicate]
2.Compare
OK
OK
Result: 01:05:23
Pass 3 Fail 0
1. Duplicate
Disk to Disk
COMP
：
3 350G
55:02 (2) 90%
OK
Result: 02:20:23
Pass 3 Fail 0
1.Duplicate
Disk to Disk
Copy&
：
3
350G
01:05:02 (02) 90%
10
％
&COMP
：
3
350G
15:05
(03) 20%
10
％
OK
[Duplicate]
3.Copy+Compare
