14
available data or whole media at
5.2 Copy Area
. A file
“IMG_XXX.dup” (X from 0-9) will be
produced.
Remark
：
Source disk, the disk you want to image to a file, have to be connected to
source port.
Image disk, the file you want to be stored, have to be connected to
target port 1.
The format of Image HDD
MUST
be exFAT.
C. File to Disk Mode
：
Selects the operation mode at
5.1 Operation Mode
. It performs restoring one of image file in
an image disk to target disks. The operation procedure is the same as the above
Disk to
Disk
mode. The connection diagram is shown below.
Remark
：
Image disk, the disk stored image files, have to be connected to
source port.
