EZ DUPE Flex PRO SD, Руководство пользователя

Страница: 6 / 18

4. Press and hold ESC button during the execution process of a task will stop and exit the
execution of the task.
5. DO NOT unplug SD or Micro SD card from the duplicator during the execution process
of a task. It may cause damage to the duplicator system and media.
6. It is strongly recommended that the capacities of the source and target media are equal
or similar.
7. DO NOT plug in SD or Micro SD card until the duplicator boots up. It may cause
abnormal results if a SD or Micro SD card with quality issue is plugged in before or
during the boot up process.
III. Synchronous /Asynchronous Mode
1. Synchronous Mode
Synchronous Mode (default) means that the duplicator will start to execute a task after the
source and target devices have been inserted and the ENT button is pressed. The task will
begin and end at the same time for all target devices. Any other target device plugged in
during the process of a task will not be executed with the task.
a. Insert source device into the source channel and blank devices into the target channels
properly. The LCD display will show no source disk when source device is not plugged in
yet, and show the number of target devices inserted when source device plugged in.
b. The green LED will be on if the target device is plugged in properly.
c. Select the task from menu, and press ENT button to execute it.
d. During the execution process, the status of each target device can be checked by using
the ▲ and ▼ buttons.
e. After the task is done, LCD display will show the number of successful and failed
target(s).
2. Asynchronous Mode
Asynchronous Mode means that the duplicator will read the data from source device into
system memory buffer and start to execute a task immediately when target device(s)
inserted. Duplicator does not have to wait for all target device(s) to be inserted in order to
start the execution of the task at the same time. No matter the data size of the source device,
5