7. Setup
7.1 Copy Area
This function allows to select the area on the source device to copy onto the target
devices. You may select “System and Files” to skip all the unoccupied area on the source
device or “W hole Media”. By default, the copy area is set up as
System and Files
(default)
.
System and Files:
The duplicator first analyzes the file format of source device. You may copy only the
system and file area to save overall copy time if the file format is FAT16, FAT32, exFAT,
NTFS (Windows), EXT2, EXT3, EXT4 (Linux), and HFS/HFS+ (Mac). Otherwise, the
duplicator will copy the entire source device content to the target devices including
unoccupied space. For instance, the source device has 8GB capacity but with only 50MB
of data in FAT32 file format. The duplicator will copy only the 50MB of data area to the
target device, hence shortening overall copy time.
Whole Media:
When selected, the duplicator copies the entire content on the source device, including both
the data and empty spaces. This option is used when you have a source device with
unknown file format. For instance a source device has 8GB capacity and 50MB of data with
unknown file format, the duplicator will copy the whole 8GB of content to target devices.
7.2 Asynchronous Mode
This function enables or disables Asynchronous Mode. By default the Asynchronous Mode
is disabled. Please refer to Chapter III for the detail of operation on Synchronous and
Asynchronous Mode.
Use
▲▼to change option
ENT
ENT
[
Copy Area
]
System And Files
7.
Setup
[
Setup
]
1. Copy Area
[
Copy Area
]
Whole Media
Use
▲▼to change option
11
Содержание Flex PRO SD
Страница 1: ...Copyright 2015 All right reserved...
