EZ DUPE Flex PRO SD, Руководство пользователя

Страница: 14 / 18

7.5 Set Slow Out Threshold
This function allows to set up read/write speed threshold for target devices. When the target
device is causing the copy or compare process delay due to its lower read/write speed and
the rest of the devices in the same batch have to wait for it, the Slow Out Threshold strategy
will be applied as the following: the system will stop the copy or compare process for that
particular target device when its read/write speed is below the threshold for continuing
number of seconds based on the setting, and its red LED will flash to give warning. There
are 3 settings to set up.
Read: set up the lowest read speed
，
and options are OFF, 1MB/s~25MB/s. The default
setting is OFF .
Write: set up the lowest write speed, and options are OFF, 1MB/s~25MB/s. The default
setting is OFF .
Duration: set up the period when read or write speed is lower than the threshold for
continuing number of time, and options are 1~20second. The default is 5second .
Use
▲▼to changeo ption
ENT
ENT
ENT
[Set Capacity Thresh>]
Capacity: OFF
[Set Capacity Thresh>]
1M=1000k
Setup Complete!
Use
▲▼to change option
ENT
Use
▲▼to change option
ENT
7. Setup
[
Setup
]
4. Set Capacity Thresh>
[Set Capacity Thresh>]
Tolerance: 5%
Use
▲▼to change option
ENT ENT
[Set Slow Out Thresh>]
Read: OFF
7.
Setup
[ Setup ]
5. Set Slow Out Thresh>
[Set Slow Out Thresh>]
Duration: 5sec
Setup Complete!
ENT
ENT
[Set Slow Out Thresh>]
Write: OFF
ENT
Use
▲▼to change option
Use
▲▼to change option
13