TM3 Hardware Installation Manual
©Eyetech Digital Systems, Inc.
Modified on 4/10/2008
6
2.0 Installation
Line up the four mounting holes on the VT2 tracking module with the four
mounting holes on the VT2 VESA bracket.
Insert each of the four screws provided with the bracket in the mounting holes
from the back of the stand and tracking module.
Tighten the four screws with the included wrench.
Line up the four mounting holes on the VESA monitor with the four mounting
holes on both the VT2 VESA bracket and the VESA desktop stand.
Insert each of the four screws provided with either the VESA desktop stand or
the VESA monitor into the four mounting holes on the VESA monitor.
Insert spacers as needed and then tighten the four screws.
