TM3 Hardware Installation Manual
©Eyetech Digital Systems, Inc.
Modified on 4/10/2008
7
2.0 Installation
2.3
Tabletop Installation of VT2
Place the VT2 eye tracker on the tabletop stand as close to the bottom of the monitor as
possible.
Line up the four mounting holes on the VT2 tracking module with the four
mounting holes on the VT2 stand.
Insert each of the four screws provided into the mounting holes on the back of
the stand and tracking module.
Tighten the four screws with the included wrench.
2.4
VT2 Ports
The VT2 Eye Tracker has 3 ports.
USB 2.0 Data Port:
Connect the system to the computer via the USB 2.0
cable plugged into the USB 2.0 Data Port shown above.
Light Expansion Port:
Usage of the Light Expansion Port is optional and is
for adding additional light arrays for custom installations.
Auxiliary Power Port:
Some computer systems may require the use of the
Auxiliary Power Port in addition to the Data Port. Verify that the red LED light
on the bottom of the camera is on. If it is not, the camera is not receiving
power from the USB 2.0 port.
