Vtracker/WitnessPro-2.0
www.eye3data.com
37
The priority recording feature is only available if the schedule is set at “CON” and the date and time are the
same.
If the schedule setting is: 00:00~23:59 means full day recording.
DATE:
Press ENTER to change recording schedule
Single Day:
Choose the name of the day to create a recording schedule.
Every Day:
Choose “Every” to apply the schedule to every day of the
week.
Weekday:
Schedule will only apply on Weekdays (Monday to Friday).
**********:
Choosing the asterisks will suspend the highlighted
schedule.
TYPE:
Press ENTER to change the type of the recording mode:
CON:
Continuous Recording.
ALARM:
Alarm Recording.
SCHEDULE 1/2:
Press the RIGHT ARROW key to enter values using the NUMERIC keypad into any time field.
Schedule 1 is the first of two possible ON/OFF cycles that apply to any day in the period
chosen under that date.
Schedule 2 is the second cycle for any day in the period. There is no need to overlap times of
Schedule 1 and Schedule 2.
Ending at 23:59 of one day and beginning with 00:00 of the next day will provide continuous
recording without interruption (factory default setting).
3.7 Other Set
Set Up for the CP3 (Control Panel with Monitor). Watermark (
ON
/
OFF)
when recording:
