Vtracker/WitnessPro-2.0
www.eye3data.com
14
User default password is 22222222 and Admin default password is 88888888.
OPERATOR Password allows user to access limited video and sensor menu items.
ADMIN Password allows user full access to the MDVR.
SUPER Password allows user full access to the MDVR under the circumstance of losing the ADMIN password.
PLEASE NOTE: Press SAVE to enable all changes. The system will give a notification when changes are saved
successfully. Any modifications that are made to the network will automatically restart the system after you exit the
SETUP. The MDVR will automatically stop recording when the user enters the MDVR configuration. You can input
the letters and characters by software keyboard.
• When the password is disabled, press the SETUP key on the remote to access
the setup menu directly.
• When Password is enabled, press the LOGIN/LOCK OR ENTER key on the remote and enter the user
name and password to access the setup menu.
UNIT ID:
The ID of the WitnessPro/VTracker. You can change the ID setting in the GUI. After the ID has been
set, the number will be displayed automatically in parenthesis [i.e. (123456)].
PASSWORD:
Enter the admin password or user password.
Keyboard:
Press
【
Enter
】
to use keyboard to type device ID and password.
1
）
0~9, number key, press
【
Enter
】
to select the number.
2
）
123: Input type shift key. (Number, capital, small letter)
3
）【
←
】
delete,
【
】
Exit.
Menu Configuration
This section will show all the main functions of the WitnessPro/VTracker menu which includes SEARCH, SETUP and
INFORMATION. SEARCH is used for searching all the video files and alarm files, SETUP is used for configurations
and INFORMATION is used to display unit status.
