MAINTENANCE AND REPAIR
CAUTION: Do not clean the LED system with detergents or abrasive substances.
Turn off the LED system before performing any maintenance.
Regularly check the LED system for dust, debris or dirt buildup and clean if
necessary. Contamination may cause decreased performance. To properly
clean the system, use a dry or damp lint-free cloth. To properly clean the
LED boards, gently wipe down with a microfiber towel.
Regularly check the power cord and hanging cables of the LED system to
ensure there is no damage.
WARRANTY INFORMATION
For complete warranty details, visit eyehortilux.com/warranty
EYE HORTILUX Align
™
LED Grow Light Systems
5-year limited warranty from the date of purchase.
EYE Lighting International of North America warrants HORTILUX Align LED
Grow Light Systems to be free from defects in material and workmanship
during the period ending five (5) years from the original date of purchase.
LEDs are guaranteed to maintain 90% or better light output for those five (5)
years during normal operation. If the product shows any defects within this
period and that defect is not due to user error or improper use, EYE Lighting
shall, at its discretion, either replace or repair the system using suitable new
or reconditioned parts. Some States do not allow limitations on how long an
implied warranty lasts, so the above limitation may not apply to you.
EYE Lighting offers this warranty ONLY to the original purchasers of EYE
HORTILUX Align LED Grow Light Systems. All warranty claims must be
directed to the retail store where the EYE HORTILUX product was purchased.
LIMITATION OF LIABILITY
The warranty and remedies set forth herein are in lieu of any and all other
warranties express or implied, including any warranty of merchantability
or fitness for a particular purpose. EYE Lighting shall not be obligated or
liable for any indirect, consequential or incidental damages for breach of
this or any other warranty, express or implied, or for any claim based on
contract, tort or any other legal theory. In no event shall EYE Lighting’s
liability exceed the purchase of the product. Some states do not allow the
exclusion or limitation of incidental consequential damages, so the above
limitation or exclusion may not apply to you.
EYE Lighting International of North Amer
ica, Inc.
a division of Iwasaki Electric of Japan
9150 Hendricks Road
Mentor, Ohio 44060
Tel: (877) 905-2562
Fax: (800) 811-7395
www.eyehortilux.com
HORTILUX® is a trademark of Iwasaki Electric Co., and is registered in USA and Japan
SPECIFICATIONS
SPECTRUM
Model
LED 700-ESib
Wattage
700W
Input Voltage
120V
240V
277V
Amperage
5.8A
2.9A
2.5A
Power Cord
12 ft.
Weight
Fixture: 13.25 lbs. / Reflector 4 lbs.
Driver: 13.75 lbs.
Dimensions – L x W x H
in. (mm)
Fixture: 44.15 x 9.25 x 5.5 (1121 x 235 x 140)
Driver: 16 x 5.1 x 6 (406 x 130 x 152)
Typical Power Consumption
700W
Operating Frequency
50-60Hz
Power Factor
>0.95
Thermal Management
Passive
Environment
Suitable for damp locations
Dimming
Yes (with controller)
Controllable
Yes (controller sold separately)
PPF*
1380 µmol/sec
PBF*
1680 µmol/sec
PPF Efficacy
1.97 µmol/J
PBF Efficacy
2.4 µmol/J
Avg PPFD*
838 µmol/m
2
-sec
Avg PBFD*
998 µmol/m
2
-sec
Coverage Area
4 ft. x 4 ft.
Height Above Canopy
3 ft.
*UV and Far Red are not counted in PPF or PPFD measurements. PPFD and PBFD measurements were taken in
a 10ft x 10ft room with average reflectivity at the optimal setup recommendation. PPFD and PBFD in actual
applications will vary. | **The distance between fixtures should be measured from the edge of the system.
100
90
80
70
60
50
40
30
20
10
0
400
420
440
460
480
500
520
540
560
580
600
620
640
660
680
700
720
740
Spectral range in nanometers
Percent of relative energ
y
760
780
800
360
380
UV RANGE
FAR RED RANGE
OPTICAL RADIATION RISK
Warning: Note that hazardous optical radiation may be emitted from this
product and is a possible risk of injury to eyes or skin.
Ensure the following
precautions are taken:
UV emitted from this product. Minimize exposure to eyes and skin and
avoid looking directly at the light source. Use appropriate shielding such
as UV protective sunglasses, long sleeves or other appropriate personal
protective equipment.
It is the responsibility of the plant growth facility to address these risks
at the facility level and to ensure that people entering the plant growth
areas while the lights are on, are aware of these risks and that appropriate
safeguards are in place.
(Figure 5: DC power to fixture) (Figure 6: DC power from driver) (Figure 7: AC power to driver)
(Figure 3)
4’
4’
3’
Mounting Height:
3 feet from canopy
(Figure 4)
Hanging Holes
