Exxentric kPulley2 Скачать руководство пользователя страница 4

4

kPulley2 Manual v2.5.0

Warning

Like any exercise program, it is important that users are capable 

of performing exercises on this exercise equipment and have 

verified this with their personal physician.

During Use

Personal injuries may occur if the relevant precautions are not observed. 

• 

Work out at a submaximal** intensity until you are familiar with the equipment.

• 

Keep away from moving and/or rotating parts. 

• 

Use shoes to avoid friction burns from the spinning flywheel or drive belt during use. 

• 

Never stop a spinning flywheel with your bare hand as it may cause friction burns.

• 

Do not let the pulley block hit the kPulley height adjuster during use, absorb the eccentric load before it hits 

the device.

• 

If you feel dizzy or experience pain, stop exercising immediately. 

• 

Exercising at maximum intensity may cause temporary staggering and uncontrolled body movements due to 

fatigue. Exercise caution to prevent falling.

• 

Exxentric takes no responsibility for any injuries that may occur while using this product.

For Your Safety

Please read and understand the user manual and warning labels prior to use.

 

• 

Inspect the machine including the drive belt before use. Damaged or worn parts and warning labels 

must

 be 

replaced. See user manual for how to change and cut the drive belt. Do not modify the machine or repair it 

with non OEM parts.

• 

Before you start training, make sure the pulley block snap shackle is properly closed and connected.

• 

Flywheels may get slippery when wet. When lifting flywheels, use a secure two-handed grip.

• 

The machine and accessories are intended for strength training only. Do not use them in any other way.

• 

The kPulley can deliver a supramaximal* workload. Do not exercise at an intensity above your physical 

capacity.

• 

The device is not suitable for children or animals. 

WARNING

*) Supramaximal means higher than maximal. This means higher loads than your muscles can produce 

themselves in a shortening (concentric) action. 

**) Submaximal means below maximal. In this case, we would recommend below 75% of maximum intensity. 

Содержание kPulley2

























Отзывы: