Exxentric kBox 4 Lite Скачать руководство пользователя страница 12

Страница: 12 / 18

KBOX MAINTENANCE

Drive Belt Cautions

The Drive Belt and its attachment to the axle is the most sensitive part

of the kBox. Be attentive to wear and check regularly.

When the Belt shows signs of wear and tear, trim the end by cutting

off the damaged area or replace it with an original spare Drive Belt.

kBox4 Lite & Pro

Trimming worn Belt

If damage occurs close to the shaft it is possible to cut off the

damaged end and reattach the new end. Procedure:

• Unwind all of the belt from the shaft (left picture).

• Use the Locking Pin Removal Tool to push the Belt through the shaft

and remove the Locking Pin.

• Cut off the damaged Belt.

• Fold Belt around Locking Pin and pull the Belt and Pin into the wider

grove in the shaft.

• The Belt automatically locks into the grove when you pull it firmly.

Video:

https://youtu.be/TQ6En9pQvv4

kBox 4 manual

Содержание kBox 4 Lite



















Результаты поиска

Содержание kBox 4 Lite

Отзывы:

Похожие инструкции для kBox 4 Lite

Бренды по названию

Популярные бренды

Exxentric kBox 4 Lite, Руководство по эксплуатации продукта

Результаты поиска

Содержание kBox 4 Lite

Отзывы:

Похожие инструкции для kBox 4 Lite

Бренды по названию

Популярные бренды