extronics iWAP XN3 X2000, Инструкция по установке и эксплуатации

Страница: 23 / 29

XN3 Installation and Operating Manual
23
5 Pole Mounting
1.
Using the clamp brackets (1) and (2) place them
together as shown.
2.
Align the square nut (3) on one side and secure
with the fixing screw (4).
3.
Align the pole mounting bracket (1) with the end
of the rail (2) and slide it down the rail as shown.
4.
Align the fixing nut (3) and repeat the process.
5.
Repeat for the other side and the other rail.
6.
This is how the assembly looks when completed.
7.
Place the iWAPX3 on a protective surface as
shown 3.
8.
Align both rails on the rear as shown 4.
9.
Using washer 1, affix this in to the fixing screw 2
and pass through both the chassis and the
mounting rail and screw in to the prefitted nut.
10.
Repeat for the other side and the other rail.
11.
The unit is now ready to slide on to the
mounting pole.
12.
Tighten all fixings.
4
.
3
.
2
.
1
.
2
.
1
.
3
.
4
.