extronics iTAG X30, Руководство по эксплуатации

Страница: 14 / 29

14
Figure 8.
4.2.7 Available configurations
The iTAG X30 firmware contains predefined configurations. These configurations
define the tag type and beacon rate behaviour. Each configuration has a unique ID
number called a “Static Configuration” which cannot be edited. Only one configuration
can be selected and used per iTAG X30.
The following table shows the available configurations:
Static
Config
ID
Tag type Beacon rate Motion
enabled
Transmission SD&CT
182 iTAG X30 5 Seconds No Unidirectional No
183 iTAG X30 15 Seconds No Unidirectional No
184 iTAG X30 1 Minute / 15 seconds motion Yes Unidirectional No
185 iTAG X30 3 Minute / 5 seconds motion Yes Unidirectional No
186 iTAG X30 3 Minute / 15 seconds motion Yes Unidirectional No
187 iTAG X30 3 Minute / 30 seconds motion Yes Unidirectional No
188 iTAG X30 5 Minute / 30 seconds motion Yes Unidirectional No
210 iTAG X30 5 Seconds No Unidirectional Yes
211 iTAG X30 15 Seconds No Unidirectional Yes
212 iTAG X30 1 Minute / 15 seconds motion Yes Unidirectional Yes
213 iTAG X30 3 Minute / 5 seconds motion Yes Unidirectional Yes
214 iTAG X30 3 Minute / 15 seconds motion Yes Unidirectional Yes
215 iTAG X30 3 Minute / 30 seconds motion Yes Unidirectional Yes
216 iTAG X30 5 Minute / 30 seconds motion Yes Unidirectional Yes
Note: SD&CT
– Social Distancing and Contact Tracing