extronics iTAG X30, Руководство по эксплуатации

Страница: 13 / 29

13
Figure 6.
4.2.5 Applying the transmission channels
1. From the Detected Tags list check the iTAG X30s to configure.
2. Click the Transmission arrow . The transmission section opens, Figure 7.
3. Under the
Channels section, select the transmission channel(s).
4. Click on the Data Frame Format drop down menu and select data frame format.
The
Data Frame Format specifies the format of the tag location messages sent to
destination address. The data frame format configured in the tags should match the
data frame format of the access points. iTAG X30 tags support CCX, IBSS and WDS
data frame formats and combinations.
Figure 7.
4.2.6 Applying the configuration ID
Select the configuration ID which best suits your application, Figure 8.