8
3
iTAG X-Range Features
3.1
Emergency call button
The iTAG X-Range features a call button, which can be activated when pushed down,
in the case of an emergency. This can be used to trigger an event to show the location
of the worker in need of assistance. The LEDs remain red for approximately 30
minutes.
3.2
Visual, audible and tactile indication
The iTAG X-Range features multiple LEDs to indicate to the worker that it is running,
the emergency call button has been activated and when it has a low battery. Tactile
(not included with the iTAG X10) and audible indications occur to inform the wearer
that the emergency call button has been activated.
3.3
Wi-Fi security and Over-The-Air updates
The iTAG X-Range supports WPA2-PSK Wi-Fi security protocol used during Over-
The-Air (OTA) updates.
The tag has firmware OTA update capability which can be used when new functionality
becomes available. This eliminates the need to return the iTAG X-Range to the factory
to enable new features.
3.4
Wi-Fi Beaconing
The tag utilises lightweight beaconing communication and can be configured for CCX,
IBSS or WDS protocols.
3.5
Wi-Fi / GPS
The iTAG X30 features hybrid technology which includes Wi-Fi and GPS to accurately
locate workers in all areas of the site whether there is a dense Wi-Fi infrastructure or
not.
3.6
Wi-Fi range
Outdoor
–
Up to 200m (line of sight to an Access Point)
Indoor
–
Up to 80m (infrastructure dependant)
3.7
LF receiver
The iTAG X-Range sends out specific location reports upon arrival at a chokepoint or
gateway where an LF exciter is positioned. The iTAG X-Range
’s
behaviour can be
automatically modified whilst in certain areas after passing through a chokepoint such
as a doorway or gate.
