Extron electronics XTP T USW 103 4K, Руководство пользователя

Страница: 14 / 52

XTP T USW 103 4K Switcher • Installation 6
Inputs and Output Connections
NOTES:
• For HDMI cables, the maximum cable length is 15 feet (4.6 meters).
• Use Extron LockIt Cable Lacing Brackets to secure HDMI connectors to the device
(see
HDMI Connection on page 10).
A
Analog audio input connector (see figure 2 on the previous page) — Connect an
analog stereo audio source to the 3.5 mm tip-ring-sleeve (TRS) jack.
Tip (+)
Sleeve ( )
Sleeve ( )
Ring (-)
Tip (+)
Audio Plugs.eps
RCA Connector
3.5 mm Stereo Plug Connector
(balanced)
Sleeve ( )
Ring (R)
Tip (L)
3.5 mm Stereo Plug Connector
(unbalanced)
Figure 3. Wiring for the Analog Audio Connector
By default, audio input is selected automatically (see Audio input selection SIS
commands on page 21 to manually select audio inputs). When input 2 or 3 is
selected with automatic audio input selections, the switcher prioritizes embedded digital
audio. The table below shows the audio format that is sent over the XTP connection
when a specific audio format is not specified.
Default Audio Priorities
Selected
Video Input
Digital Embedded
Audio Present
Analog Audio
Present
Audio Sent Over XTP or
to the Local HDMI output
VGA N/A Yes Analog audio
VGA N/A No No audio
HDMI or DP Yes No Digital embedded audio
HDMI or DP Yes Yes Digital embedded audio
HDMI or DP No Yes Analog audio
HDMI or DP No No No audio
B
Analog video input connector — Connect a video source to the 15-pin HD
connector, labeled input 1. It accepts RGBHV video signals.
C
HDMI input connector — Connect a digital video source device to the female HDMI
connector, labeled input 2. It accepts HDMI, DVI (with an appropriate adapter), or dual
mode DisplayPort video sources.
D
DisplayPort input connector — Connect a digital video source device to the female
DisplayPort connector, labeled input 3.
E
HDMI output connector
— Connect a digital video display to the HDMI output
connector for a local display of the selected input.