background image

 

3

Front Panel Features

Figure 4 shows the TLP Pro 1720TG front panel diagram. The features of the TLP Pro 1220TG and TLP Pro 1520TG are very similar.

A

A

A B

B

B

C

C

C

D

D

D

E

E

E

F

F

F

E

E

E

Figure 4. 

TLP Pro 1720TG Front Panel

A

 

Communication LED

 — Shows the configuration and connection status of the touchpanel:

• 

Unlit during normal operation.

• 

Blinks red if the touchpanel has been configured but is not connected to an IP Link Pro control processor.

• 

Lights steadily if the touchpanel has not been configured.

The indicator can be enabled and disabled, using the 

Setup Menu

 (see page 6).

B

 

Status light

 — can be programmed to provide system feedback. The LED light bar is located above the screen.

C

 

Ambient light sensor

 — monitors ambient light level and adjusts screen brightness.

D

 

Capacitive touch screen

 — provides simple control of AV systems:

• 

The TLP Pro 1220TG has a 12.1 inch screen with a 1280x800 resolution.

• 

The TLP Pro 1520TG has a 15.6 inch screen with 1366x768 resolution.

• 

The TLP Pro 1720TG has a 17.3 inch screen with 1920x1080 resolution.

E

 

Speakers

 (2) — provide stereo audio for video preview and audible feedback from button presses. They are located below the 

screen, one on each side of the panel.

F

 

Motion sensor

 — detects motion in front of the touchpanel.  

figure 4

Содержание TouchLink TLP Pro 1220 Series







Отзывы: