Extron electronics TLP Pro 520M, Руководство пользователя

Страница: 47 / 73

Room Scheduling System • Room Agent Installation and Configuration 41
Assign or change a background image as follows:
NOTE: Room Agent software and the scheduling system support image files with
the following traits only:
• JPEG or PNG format
• 800x480 resolution
• 8-bit color
1. Click the
Change Image
... button (see figure 41 ,
3
on the previous page). The
Open
dialog box opens.
2. Navigate to the folder where you saved the background image file. Select the file
(see
figure 42 ,
1
on the previous page).
3. Click
Open
(
2
). The
Open
dialog box closes and the newly assigned background
image is displayed in the preview pane (see figure 41 ).
4
Overlay Opacity
(see
figure 41
) —Click
and drag this fader control or type a value
directly in the field to set the opacity of any displayed background image.
Date & Time tab
If necessary, click the
Date & Time
tab (see figure 43,
1
) to make changes to the date and
time format.
5 5 5 5 5 5 5 5 5 5
6 6 6 6 6 6 6 6 6 6
7
7 7 7 7 7 7 7 7 7
1 1 1 1 1 1 1 1 1 1
2 2 2 2 2 2 2 2 2 2
3 3 3 3 3 3 3 3 3 3
4
4 4 4 4 4 4 4 4 4
Figure 43. Panel Design Pane, Date & Time Tab
2
Time Format, Time: drop-down list — Use this drop-down list to select among
12-Hour
(
1:30
PM , for example),
24-Hour US
( 13:30 ),and
24-Hour International
( 13.30 ).
3
Room Availability Format, Start time: drop-down list — Use this drop-down list to
select the start time of room availability display, in half-hour increments.
4
Room Availability Format, End time: drop-down list — Use this drop-down list to
select the end time of room availability display, in half-hour increments. The menu also
shows the quantity of time the room availability is displayed.
5
Date Format radio buttons — Use these radio buttons to select the format to display
on the panel. After you select either
Short date
or
Long date
, the associated drop-
down list (see
6
and
7
on the next page) becomes available for selection.