background image

FCC Class A Notice

This equipment has been tested and found to comply with the limits for a Class A digital 
device, pursuant to part 15 of the FCC rules. The Class A limits provide reasonable protection 
against harmful interference when the equipment is operated in a commercial environment. 
This equipment generates, uses, and can radiate radio frequency energy and, if not installed 
and used in accordance with the instruction manual, may cause harmful interference to radio 
communications. Operation of this equipment in a residential area is likely to cause interference. 
This interference must be corrected at the expense of the user.

NOTE:

  For more information on safety guidelines, regulatory compliances, EMI/EMF 

compatibility, accessibility, and related topics, see the 

Extron Safety and Regulatory 

Compliance Guide

 on the Extron website.

Battery Notice

This product contains a battery. 

Do not open the unit to replace the battery.

 If the 

battery needs replacing, return the entire unit to Extron (for the correct address, see the 

Extron 

Warranty

 section on the last page of this guide).

CAUTION:

  Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used 

Batteries According to the Instructions.

ATTENTION :

  Risque d’explosion. Ne pas remplacer la pile par le mauvais type de pile. 

Débarrassez-vous des piles utilisées selon le mode d’emploi.

Содержание TLP Pro 1022T


































Отзывы: