Extron electronics RGB to DVI Scaler RGB-DVI 300, Руководство пользователя

Страница: 43 / 68

RGB-DVI 300 and RGB-HDMI 300 • Serial Communications
4-5
The parameters saved in memory presets and input presets are:
User Presets Input Presets
H position Input type H start H position
V position Total Pixel V start V position
Contrast H size Contrast H active H size
Brightness V size Brightness V active V size
Detail Zoom Detail Phase Zoom
X2)
— Test patterns:
0 = Off (default) 5 = Crop
1 = Color Bars 6 = 1.33 Aspect Ratio
2 = Grayscale 7 = 1.78 Aspect Ratio
3 = 4 x 4 Crosshatch 8 = 1.85 Aspect Ratio
4 = Alternating Pixels 9 = 2.35 Aspect Ratio
X2!
— RGB delay (0 to 50 in tenths of a second – 0 to 5 seconds;
default 0.5 seconds). The screen blanks during transition
between inputs of different resolutions, to avoid glitches.
X2@
— On-screen menu time out in seconds (default = 10)
0 = menu never times out; 1 to 64 in seconds
X2#
— Horizontal and Vertical Frequencies (format is three
digits with single decimal and leading zeros).
X2$
— Internal temperature (in degrees Celsius)
X2%
— Off/disabled (0) or on/enabled (1)
X2^
— Overscan: applied only to SMPTE (480p - 1080p) input
rates.
0 = 0% (Default for RGB input type) A "true" auto image
is executed on SMPTE inputs
1 = 2.5% (Default for YUV input type) An auto image
command will snap to a 2.5% table; no true auto image
2 = 5% An auto image command will snap to a 5% table;
no true auto image
X2&
—
User Preset Availability: 0 = empty; 1 = saved
Error messages
E10 = Invalid command E14 = Not valid for this config.
E11 = Invalid preset number E17 = Invalid command for signal type
E13 = Invalid parameter E22 = Busy
N If the RGB-DVI 300 or RGB-HDMI 300 does not
support or recognize the entered commands, nothing will
happen and no response is issued.