Extron electronics RGB to DVI Scaler RGB-DVI 300, Руководство пользователя

Страница: 16 / 68

RGB-DVI 300 and RGB-HDMI 300 • Installation
Installation, cont’d
2-6
Front Panel Layout
The illustration below shows the front panel features and
controls of the RGB-HDMI 300 (upper image) and RGB-DVI 300
(lower image):
RGB - DVI 300
MENU ENTER
ADJUST
CONFIG
RGB - HDMI 300
MENU ENTER
ADJUST
CONFIG
1 2 3 4
Front panel layout
a
LED indicator — A solid green light indicates the unit is
receiving power and has an active video input. A solid amber
light indicates the unit is receiving power but no video input.
b
Config port — Both models can be configured using the Extron
Simple Instruction Set (SIS ™ ) commands or through the Signal
Processing Products Control Program (SPPCP). Either type of
control is provided through this 2.5 mm Tip Ring Sleeve (TRS)
serial configuration port or the RS-232 captive screw connector
on the rear panel (
8
). See chapter 4 for instructions about SIS
commands and the control software.
c
Menu and Enter buttons — These buttons are used to navigate
the menu when configuring the input and output video signals
(see page 3-8) and to enable and disable the Front Panel Security
Lockout (Executive mode; see page 3-8).
N To see menu selections, a display device must be attached
to the output of the video converter.
d
Rotary encoders — The horizontal and vertical rotary encoders
highlight menu items and adjust the value of items that have
been selected from the menu.