RGB 130
xi
xi
xi
xi
xi
, 134
xi
xi
xi
xi
xi
, 150
xi
xi
xi
xi
xi
Controls and Installation
Controls and Installation, cont’d
2-13
3.
Slide the audio cable connector into the audio output
connector on the interface.
Balanced audio
To attach the interface to a balanced audio system, do the
following:
1.
Attach the audio cable to a balanced speaker input
connector (tip, ring, and sleeve).
2.
Attach the audio cable to the audio cable connector
(Extron part number 10-319-10). Fasten the captive
screws inside the audio cable connector as shown in
figure 2-14.
Connect the sleeve(s) to ground (GND).
Connecting the sleeve(s) to a negative (-)
terminal will damage audio output circuits.
3.
Slide the audio cable connector into the audio output
connector on the interface.
Tip (+)
Sleeve
Tip (+)
Ring (-)
Sleeve
Balanced Output
Tip
Ring
Sleeve (s)
Tip
Ring
Содержание RGB 130xi
