Extron electronics PowerCage FOX Rx HDMI, Руководство пользователя

Страница: 31 / 45

PowerCage FOX HDMI • Remote Control 23
Command ASCII Command
(Host to Unit)
Response
(Unit to Host)
Additional Description
Symbol definitions for receiver SIS commands
]
= Carriage return/line feed
}
= Carriage return (no line feed)
| = Pipe (can be used interchangeably with the
}
character)
• = space
E
= Escape key
W = Can be used interchangeably with the
E
character
X(
= Mute or auto memory status and enable or disable status 0 = off or disable 1 = on or enable
X1)
= Link and input status 0 = link or input not detected 1 = link or input detected
X1!
= Internal temperature nnn F• nn C
X1@
= Transmission mode SM = singlemode MM = multimode
X1#
= Firmware version v . vv
X1$
= Sync frequency xxx . xx (frequency in kHz [H] or Hz [V])
X1%
= Horizontal and vertical position 000 through 255
X1^
= Memory preset number 01 through 30
X1&
= Test pattern
0
= none
2
= grayscale
1
= color bars
3
= alternating pixels
X1*
= Rx link and daisy chain enable 0 = disable 2 = daisy chain enable
1 = return link enable
X1(
= Video bit depth 0 = auto 1 = 8-bit
X2)
= Video delay (0 plus six steps at 0.25 seconds per step) 0 = 0 second
1 = 0.25 second 4 = 1.0 second
2 = 0.5 second (default) 5 = 1.25 second
3 = 0.75 second 6 = 1.5 second
X2!
= Switch position 0 = off (right) 1 = on (left)
Command and Response Table for Receiver SIS Commands
Command ASCII Command
(Host to Unit)
Response
(Unit to Host)
Additional Description
Video mute
Mute output
1B
Blk1
] Blank the video output.
Unmute output
0B
Blk0
] Output video.
Show video mute status B X(]
Video mute status is
X(
.
Horizontal shift
Set a horizontal position X1%
H Hph
X1%]
Set horizontal centering to
X1%
.
Increment position +H
Hph
X1%] Shift the image one pixel to the right.
Decrement position –H
Hph
X1%] Shift the image one pixel to the left.
Show position
H X1%]
Vertical shift
Set a vertical position
X1%
/ Vph
X1%]
Set vertical centering to
X1%
.
Increment position
+/
Vph
X1%]
Shift the image down one line.
Decrement position
–/
Vph
X1%] Shift the image up line.
Show position
/
X1%]
List sync frequency
View input frequency
1LS
X1$
horizontal
,
X1$
vertical
] Shows horizontal frequency in kHz and vertical
frequency in Hz.
000.0 , 000.0 if no signal is
detected.
Memory presets
Save preset
X1^
, Spr
X1^]
Command code is a comma.
Recall preset X1^
. Rpr
X1^] Command code is a period.