Extron electronics NAV SD 101, Руководство пользователя

Страница: 61 / 82

NAV SD 501 and NAV SD 101 Scaling Decoders • HTML Operation 53
PRELIMINAR
Y
NOTE:
IP Address
,
Subnet
,
Gateway
,
DNS Server
, and
DNS Suffix
are not editable
when
DHCP
is on.
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
4
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
A A A A A A A A A A A A A A A A A A
B B B B B B B B B B B B B B B B B B
A A A A A A A A A A A A A A A A A A
B B B B B B B B B B B B B B B B B B
DHCP On DHCP Off
* *
* NAV SD 501 only
Figure 55. Editable Network Connection Selection
1
DHCP — Click to toggle DHCP on and off. When off, the decoder defaults to the Link
Local address (see
A
).
2
IP Address, Subnet, and Gateway — Click in these fields and type in values to enter
the appropriate connection values for your decoder.
3
DNS (domain name system) Server — Click in this field and type in the name of the
domain name server.
4
DNS suffix
— Click in this field and type the valid domain name suffix of the domain
name server.
5
Ethernet Extension — Click to toggle the rear panel Extension port (see figure 2 ,
F
on page 5) on and off.
NOTE: If DHCP is off for the extended network or if you want a static IP on the
decoder and the extended device, both must be in the same IP address range.
6
Save and Cancel buttons — Click Save to take
Network Connection
changes or
Cancel to abandon them. Clicking either button closes the editable pane.
NOTES:
• Link Local (
A
) — DHCP is on by default. When a DHCP server is not accessible,
the Link local IP Address is used.
• MAC Address
(
B
) — A unique read-only identifier for network connected devices.