Extron electronics NAV SD 101, Руководство пользователя

Страница: 43 / 82

NAV SD 501 and NAV SD 101 Scaling Decoders • HTML Operation 35
PRELIMINAR
Y
NOTE: Your tab display may differ from figure 27 on page 34.
• The AES67 tab is present only when an Extron AES67-capable device, such as a
DMP 128 ProDSP Digital Matrix Processor, is tied into the NAV system. See the
user guide for the applicable device to configure that device and also the Dante
documentation.
• The
USB
tab and
USB Tie
in the
Current Output
pane are present for
NAV SD 501 only.
Current Output pane
The
Current Output
pane displays the output number and name of the decoder to which
you are connected.
Available Inputs pane
The
Available Inputs
pane displays the input number, audio mode, model, and IP
address of all encoders available for tying to this decoder. To tie an encoder to this decoder,
click the desired encoder (
Available Inputs
) and audio/video selection (
A
/
V
,
Audio
, or
Video
). A video and audio tie is indicated in amber, audio only in red, and video only in
green. Click in an existing tie to untie it. Figure 27 shows audio and video (
A
/
V
) from input
3322
tied to the decoder.
NOTES
:
• Also on this page, you can open an HTML page of a connected encoder, if it is
connected through a NAVigator (this is known as “proxying an endpoint”). Click
the
IP Address link in the desired input (
A
). The HTML page opens a new tab
in the browser that is connected to the selected encoder. The proxied encoder
HTML page behaves as described in the guide for the encoder (see the applicable
encoder guide available at
www.extron.com ).
•
The Break Ties (
B
) link unties the decoder from the input.
• When you select the USB tab (see figure 28), the appearance of the
Current
Output
pane and
Available Hosts
pane changes.
• Only encoders that can stream USB and make USB ties are shown (
A
) in
Current Output
and the tied USB decoder is shown.
•
Available
Hosts
shows the tied USB encoder (
B
).
B B B B B B B B B B B B B B B B B B
A A A A A A A A A A A A A A A A A A
Figure 28. Current Output and Available Hosts for USB Tab