Extron electronics NAV E 101 DTP, Руководство пользователя

Страница: 68 / 78

NAV E 101 DTP Encoder • SIS Operation 60
Encoder Error Responses
When the encoder receives a valid SIS command, it executes the command and sends a
response to the host device. If the encoder is unable to execute the command because the
command is invalid or it contains invalid parameters, the encoder returns an error response
to the host. The error response codes are:
E10 — Invalid command
E12 — Invalid port number
E13 — Invalid parameter
E14 — Invalid for this port configuration
E17 — Invalid command for signal type
E22 — Busy
E24 — Privilege violation
E25 — Device not present
E28 — Bad file name or file not found
Using the Command and Response Tables
The command and response tables begin on page 61. Symbols are used throughout the
tables to represent variables in the command and response fields. Command and response
examples are shown throughout the tables. The ASCII to HEX conversion table below is for
use with the command and response tables.
ASCII to Hex Conversion Table
•
Space
Common Symbol Definitions
]
= Carriage return/line feed
}
= Carriage return (no line feed)
| = Pipe (can be used interchangeably with the
}
character)
• = space
E
= Escape key
W
= Can be used interchangeably with the
E
character