Extron electronics MVX Plus 128 VGA A, Руководство пользователя

Страница: 31 / 162

3-5
MVX Plus 128 VGA A Matrix Switcher • Operation
PRELIMINAR
Y
e
View ( < ) button — The View ( < ) button has two primary functions (•) and
eight secondary functions (
❏
):
• Select View-only mode that displays the current configuration.
N
View-only mode also provides a way to mute and unmute the outputs. See
“Muting and unmuting video and/or audio outputs” on page 3-29.
• Indicate that View-only mode is active.
❏
In the I/O Group mode, select group 3. See “I/O grouping” on page 3-19.
❏
In the I/O Group mode, indicate that group 3 is selected. See “I/O
grouping” on page 3-19.
❏
Decrease the RGB delay of switches to the selected output. See “Setting
RGB delay” on page 3-23.
❏
Decrease the audio level of the selected input. See “Viewing and
adjusting the input audio level” on page 3-32.
❏
Decrease the volume of the selected output. See “Viewing and adjusting
the output volume” on page 3-36.
❏
With the Enter, Preset, and Esc buttons, select Serial Port Configuration
mode. See “Selecting the rear panel Remote port protocol and baud rate”
on page 3-43.
❏
Select 38400 baud for the RS-232/RS-422 port in
Serial Port Configuration
mode. See “Selecting the rear panel Remote port protocol and baud rate”
on page 3-43.
❏
Indicate that the RS-232/RS-422 port is set to 38400 baud in Serial Port
Configuration mode. See “Selecting the rear panel Remote port protocol
and baud rate” on page 3-43.